[j-nsp] How to display active Routes only ?

[Harry Reynolds]

Hello,

Perhaps you need to escape the meta character (* and [), such as:

lab at foo# run show route | match \*\[   
10.222.2.0/24      *[OSPF/10] 5d 23:48:55, metric 3
10.222.3.0/24      *[OSPF/10] 5d 23:48:55, metric 4
10.222.5.0/24      *[OSPF/10] 5d 23:44:09, metric 2
10.222.6.0/24      *[OSPF/10] 5d 23:48:55, metric 6


HTHs

 

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> jens.hoffmann at ddkom.de
> Sent: Thursday, January 19, 2006 7:18 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] How to display active Routes only ?
> 
> 
> 
> 
> 
> Hi,
> 
> one little question :
> 
> With "show route community xxxxx:yyyyy" I can see all routes 
> with community xxxxx:yyyyy ........ but ALL (!) routes
> 
> How can I see only the ACTIVE routes withe the community 
> xxxxx:yyyyy only ?
> 
> "show route community xxxxx:yyyyy | match *[ "  is not the way ...
> 
> Kind regards,
> Jens Hoffmann
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>