[j-nsp] How to display active Routes only ?

[Harry Reynolds]

If I follow, there is an ER on file for the suggested enhancement
against JUNOS software. It is ER 10327.

I do not think you need the ER number to express interest in a feature,
but it may help avoid a duplicate feature request.

HTHs



> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Jeff S Wheeler
> Sent: Tuesday, January 24, 2006 10:02 AM
> To: juniper-nsp at puck.nether.net
> Subject: RE: [j-nsp] How to display active Routes only ?
> 
> On Tue, 2006-01-24 at 07:18 -0800, Harry Reynolds wrote:
> > Perhaps you did not see original reply. Community filter or not, I 
> > think you need to escape shell meta characters for what you 
> are trying 
> > to accomplish.
> 
> cli> show route active
> This feature has been requested on the list many times.  I 
> notice some other CLI convenience features have been added 
> recently, for example the `commit confirmed` timer (which is 
> admittedly buggy in 7.4R1.7.)  How do I reference the `show 
> route active` enhancement request when speaking with my 
> distributor?  I'd like to indicate my clients' desire for 
> this feature through the sales channel.
> 
> - J
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>