[j-nsp] Interworking ATM with Ethernet....

[Richmond, Jeff (ELI)]

I believe this was covered already on j-nsp. See thread below:

http://puck.nether.net/pipermail/juniper-nsp/2005-February/003760.html

Regards,
-Jeff

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Jose Sanchez
Sent: Monday, June 05, 2006 10:50 AM
To: juniper-nsp
Subject: [j-nsp] Interworking ATM with Ethernet....


Hello,

I need to know if there is a way to "connect" an atm/frame-relay connected
CPE to an Ethernet Network using Q-in-Q, according to the following diagram:


cpe -----  ATM Cloud ----- Juniper M10i ------ Metro Ethernet Switch
(Extreme 12804R using Q in Q) ----- Metro Ethernet Cloud ---- cpe

Thank you very much

Jose Sanchez
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp