[j-nsp] DHCP server on M-series router

[Erdem Sener]

you can configure an m series router as dhcp/bootp relay server though:

http://www.juniper.net/techpubs/software/junos/junos76/swconfig76-policy/html/sampling-config9.html

HTH

On 6/12/06, Ebben Aries <Ebben.Aries at albertsons.com> wrote:
> To my knowledge, DHCP server functionality is only available on
> J-Series.
>
> http://www.juniper.net/products/junos/105021.html
>
> --
> Ebben
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Jeroen Valcke
> Sent: Monday, June 12, 2006 10:16 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] DHCP server on M-series router
>
> Hello,
>
> For a temporary lab setup I will connect about then PC on an Ethernet
> link on an M-series router. I want to avoid installing an extra *nix PC
> as gateway. So I thought about using NAT on the M-series router, which
> seems to be supported. However to my surprise I can't find anything
> about running a DHCP server on the M-series router. Is this not
> possible?
>
> Best regards,
> -Jeroen-
>
> --
> Jeroen Valcke
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
Erdem
"http://tr1.monstersgame.net/?ac=vid&vid=20030512"