[j-nsp] Ascend-??? radius attributes on Juniper ERX

Goldschmidt, Bernd bernd.goldschmidt at siemens.com
Wed Mar 29 08:44:42 EST 2006


Ok, as you can see in my lab setup it works fine.
Therefor further troubleshooting is needed.
A "log sev 7 radiusattributes" from the ERX would be helpful.
If you tell me, what exact filter you try to setup I can verfiy it im my lab. 

Gruß
Bernd.


> -----Original Message-----
> From: Blaz Zupan [mailto:blaz at amis.net] 
> Sent: Wednesday, March 29, 2006 3:38 PM
> To: Goldschmidt, Bernd
> Cc: juniper-nsp at puck.nether.net
> Subject: RE: [j-nsp] Ascend-??? radius attributes on Juniper ERX
> 
> > Attached a trace.
> >
> > Frame 78 is the response for user ascend3, which will _not_ 
> work with the ERX.
> > Frame 230 is the response for user ascend2, which works 
> fine with the ERX.
> >
> > As you can see the ERX expect not the vendor specific 
> attribute 26-x, he is expecting the attribute 242.
> >
> > Does that help?
> 
> Unfortunatelly, no. We are sending attribute 242. From the Radiator 
> dictionary:
> 
> ATTRIBUTE  Ascend-Data-Filter 242 abinary
> 



More information about the juniper-nsp mailing list