[j-nsp] M7i :hard-disk missing in Boot List

[Dan Evans]

Please contact Juniper TAC with this error. They can assist you in
adding the HD  back to the boot list.

-Dan



On 5/10/06, juniper light <juniperlight at gmail.com> wrote:
> Hi all,
> Have any one seen this alarm :
>
> M7i> show system alarms
> 1 alarms currently active
> Alarm time               Class  Description
> 2006-05-10 12:47:17 WET  Major  Host 0 hard-disk missing in Boot List
>
> seem to have some entries in /etc/vfstab not correctely mounted after the
> router reboot,
> i tried to correct the file system using : fsck -y but no results :
> % cat /etc/fstab
> #version 3
> # Device       Mountpoint  FStype  Options  Dump  Pass#
> /dev/ad0s1a    /           ufs     rw        1    1
> /dev/ad0s1e    /config     ufs     rw        2    2
> proc           /proc       procfs  rw        0    0
> /dev/ad1s1f    /var        ufs     rw,noauto 2    0
> /dev/ad1s1b    none        swap    sw        0    0
> /dev/ad1s1b    /tmp        mfs     rw,noauto 0    0
> /dev/ad1s1a    /altroot    ufs     rw,noauto 2    0
> /dev/ad1s1e    /altconfig  ufs     rw,noauto 2    0
>
> %fsck -y /dev/ad0s1e
>
> ** /dev/ad0s1e
> ** Last Mounted on /config
> ** Phase 1 - Check Blocks and Sizes
> ** Phase 2 - Check Pathnames
> ** Phase 3 - Check Connectivity
> ** Phase 4 - Check Reference Counts
> ** Phase 5 - Check Cyl groups
> 5 files, 9 used, 12309 free (13 frags, 1537 blocks, 0.1% fragmentation)
>
> ***** FILE SYSTEM STILL DIRTY *****
>
> ***** PLEASE RERUN FSCK *****
>
> Appreciate your help.
>
> Best ones
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>