[j-nsp] max number ATM VC/VP

[Rendo]

Hi,
Thanks, but how about the max number of simultaneous VP and VC that we can have in one PIC or in one port?
 
-rendo- 


----- Original Message ----
From: Siddharth Borkar <siddhu at juniper.net>
To: Rendo <r3nd0 at yahoo.com>; juniper-nsp at puck.nether.net
Sent: Tuesday, May 30, 2006 4:30:58 PM
Subject: RE: [j-nsp] max number ATM VC/VP


Hi,

VPI range is 0-255 (i.e 256 VPI's)
VCI range is 0-65535 (i.e 65536 VCI's)
This is applicable per port. 

Regards
~Siddhu

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Rendo
Sent: Tuesday, May 30, 2006 1:35 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] max number ATM VC/VP

Hi,

does anyone know or have any documentation about maximum number of VC/VP
in ATM2 interface in M-series (per PIC and also per port) ?
Also, is there any limitation in term of maximum VC  per VP?


thanks.


-rendo- 
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp