[j-nsp] Per packet loadsharing onthe ERX ? (SOLVED)

[Peter Krupl]

Hi Guys,

 Problem solved...... i have to use "ip multipath round-robin"....


Med venlig hilsen/Kind regards
Peter Åris Krüpl

 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Peter Krupl
Sent: 27. november 2006 12:19
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Per packet loadsharing onthe ERX ?

Hi Guys,

Does anyone know if it is possible to do per-packet loadsharing,
on the ERX-310 ?

I have 2 atm pvc's each encapsulated in RFC1483 bridging, 
with a link subnet for each line. 
And I have 2 static routes pointing the same destination subnet
via each line.

I can see the ERX does per session load sharing, can I modify this behaviour ?

I have tried the documentation, but my failure in finding anything relevant could
indicate that this is not possible on the ERX ...

Anyone ?

Med venlig hilsen/Kind regards
Peter Åris Krüpl
Netværksspecialist

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.17/553 - Release Date: 27-11-2006 04:00
 

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.17/553 - Release Date: 27-11-2006 04:00
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.14.17/553 - Release Date: 27-11-2006 04:00