[j-nsp] Examples of 4to6 configurations on an M320...
daubman at gmail.com
Mon Nov 27 15:44:20 EST 2006
I'm looking for some basic configurations of 4to6, where an M320
based backbone is running ospf3 using only IPv6 between the M320 nodes
and some edge routers have ipv4-only hosts connecting to them and the
ipv4 traffic needs to be routed across the ipv6 backbone.
A simple picture would be:
Also, if anybody has examples of the same setup between a cisco GSR
and a Juniper M320 that would prove useful.
More information about the juniper-nsp