[j-nsp] M20 - SSB replacing

[Eric Van Tol]

Please keep in mind that installing a new SSB should not interrupt
traffic flow, but once you want to use the new SSB and failover to it,
all FPCs and PICs *will* reset.

-eric

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Elian
Scrosoppi
Sent: Tuesday, October 17, 2006 3:27 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] M20 - SSB replacing

Hi Guys,

I have to replace a failure SSB in a M20 model. This SSB is in slot 0,
and i want to insert the replacement card in slot 1 in order to retire
the affected SSB (slot 0) and don't interrupt traffic forwarding, so the
only SSB in the router will be in slot 1.

Is this a problem? If my router crash and reboots, what will happen if
SSB slot 0 is empty? Any other consideration to do this?

Thanks in advance,
Elian.

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp