[j-nsp] Multiple loopback units

[Ebben Aries]

You will get that error until you bind the interface to a routing-instance
eg.

TEST-VPN {
    instance-type vrf;
    interface lo0.5;
    route-distinguisher 10:123;
    vrf-target target:10:123;
}


--

Ebben

On Wednesday 18 October 2006 11:24 am, Jose Sanchez wrote:
> Hi,
>
> In the
> http://www.juniper.net/techpubs/software/junos/junos80/swconfig80-vpns/html
>/vpnl3-config32.html#1072419
>
> I can read the following text: For Layer 3 VPNs (VRF routing instances),
> you can configure a logical unit on the loopback interface into each VRF
> routing instance that you have configured on the router. Associating a VRF
> routing instance with a logical unit on the loopback interface allows you
> to easily identify the VRF routing instance.
>
> What I tried to do is:
> [edit interfaces lo0 unit 5 family inet]
> router# commit
> [edit interfaces lo0]
>   'unit 5'
>
>
> I got the following error:
>     if_instance: Multiple loopback interfaces not permitted in master
> routing instance
> error: configuration check-out failed
>
>
> How can I configure multiple loopback units, one for each vrf?
>
> Thank you
>
>
> Jose Sanchez
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

-- 
Ebben Aries
Lead Network Engineer
United Communications, Inc.
389 SW Scalehouse Ct. Suite 100
Bend, OR  97702
Office: 541.322.1407
Fax: 541.322.1417
earies at uci.net