[j-nsp] Automating tasks

[Erdem Sener]

Hi,

 JUNOScope is a powerfull tool for automating tasks. Of course, you
always have other options like writing your own perl/shell/etc scripts
and automate tasks.

 In my experience, using xml format for altering the configuration
along with perl scripts is the fastest and most reliable way.

 If you decide to go with your own scripts, it's a good idea to use
'configure exclusive' while entering the configuration mode in case
you loose connectivity while executing the script. This way, JUNOS
will automatically discard any changes made and you won't risk for
example any *incomplete* filters that would harm your network.

 For JUNOScope, please refer to the following url:

http://www.juniper.net/techpubs/software/junos/junos80/junoscript80-guide/html/part-client-app.html

HTH


On 10/20/06, Luiz Antonio F. da Silva <luiz at rnp.br> wrote:
> Hi,
>
> I need to automate some tasks, for example, to disable an alarm or apply a
> filter in a group of routers.
>
> What are you using to do this? Is somebody using JUNOScope?
>
> Thanks in advance,
>
> Luiz Antonio
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>


-- 
Erdem