[j-nsp] e1 links with logical router

[snort bsd]

thanks. it was physical link issue i still don't know
what happend. i did loopback local/remote few times
and it worked.

weird

_ming

--- adel mezibra <adel at peoch.net> wrote:

> 
> i guess you are meaning ds3 to t1 (not e1)
> 
> you just need to move the logical interface unit to
> the logical router
> config.
> 
> the physical part remain in the main router configs.
> 
> so that looks like :
> 
> logical-routers {
>     test-lr {
>         interfaces {
>             t1-1/0/0:1 {
>                 unit 0 {
>                    family inet {
>                        address x.y.z.t/n;
>                    }
>                 }
>             }
>         }
>     }
> }
> interfaces {
>     ct3-1/0/0 {
>         partition 1 interface-type t1; # t1-1/0/0:1.
>     }
>     t1-1/0/0 {
>         encapsulation hdlc;
>     }
> }
> 
> adel
> 
> > hi all:
> >
> > i am trying to assign a ds3 link to a logical
> router.
> > it works fine under main router, but it doesn't
> work
> > once it was assigned to a logical router:
> >
> >     Flags: Device-Down Point-To-Point SNMP-Traps
> > Encapsulation: Cisco-HDLC
> >     Protocol inet, MTU: 1500
> >       Flags: None
> >       Addresses, Flags: Dest-route-down
> Is-Preferred
> > Is-Primary
> >
> > somehow it can't find remote address
> ("Device-Down"
> > and " Dest-route-down") under logical router.
> >
> > any help would be greatly appreciated.
> >
> >
> >
> >
> >
> ____________________________________________________
> > Do you Yahoo!?
> > Yahoo! Dating: Get busy flirting with your 7-day
> free pass
> > http://au.personals.yahoo.com
> > _______________________________________________
> > juniper-nsp mailing list
> juniper-nsp at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> 
> 
> 



		
____________________________________________________ 
Do you Yahoo!? 
Take part in Total Girl’s Ultimate Slumber Party and help break a world record 
http://www.totalgirl.com.au