[j-nsp] QoS on P-12FE

[Harry Reynolds]

Good points. However in 8.x you cannot even see the queues stats for
aggregate; not sure about 7.x:

root at boing% cli
regress at boing> show interfaces queue fe-0/2/0 
Ingress queue statistics are not applicable to this interface.

JUNOS Base OS boot [8.2-20060919.0]



 

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Sean Clarke
> Sent: Friday, September 22, 2006 1:30 AM
> To: Peering
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] QoS on P-12FE
> 
> Hi Diane
> 
> The  12port  PIC  SHARES  the  4 queues over the 12 ports, 
> i.e. all 12 ports  will share the same stats - therefore you 
> should also apply the SAME  QoS  profile  to  all  queues.  
> So the stats are not very informative really on a per-port basis ...
> 
> show interface queue fe-x/y/z ...
> 
> Cheers
> Sean
> --
> 
> Not so long ago you wrote : 
> P> Is there a way to show stats on the QoS queues on a 12-port Fast 
> P> Ethernet PIC for the M-20?  I'm on 7.3R6.
> 
> P> Thanks in advance,
> P> Diane Turley
> P> Sr. Network Engineer
> P> Xspedius Communications Co.
> P> 636-625-7178
> 
> P> _______________________________________________
> P> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> P> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>