[j-nsp] jnxPingResultsTable
Ian MacKinnon
ian.mackinnon at lumison.net
Mon Apr 9 10:56:40 EDT 2007
Hi All,
I am trying to set up some monitoring using "service rpm"
I have a simple probe set up :-
rpm {
probe Probe1 {
test test-ping {
probe-type icmp-ping;
target address 10.0.0.2;
probe-count 10;
test-interval 30;
}
}
}
And that seems to run fine, and I can retrieve results from the command
line.
Now I actually want to retrieve the results remotely using snmp.
I know the results should be in jnxPingResultsTable, has anybody got any
examples of this worrking?
Thanks
--
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison, nplusone or lightershade ltd.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Lumison, nplusone and lightershade ltd accepts no
liability for any damage caused by any virus transmitted by this email.
--
--
Virus scanned by Lumison.
More information about the juniper-nsp
mailing list