[j-nsp] Using QoS to ensure BGP bandwidth

Jason J. W. Williams jasonjwwilliams at gmail.com
Fri Apr 20 20:26:26 EDT 2007


Hello,

I've been investigating using QoS to ensure BGP traffic out of our
router to the peer gets transmitted even when the line is at full
saturation. I was going to use a firewall filter to assign all BGP to
a queue with strict-high priority, however it appears that
network-control traffic is assigned to queue 3 by default which should
supersede all other traffic that appears to default to queue 0. Am I
reading this wrong? Thank you in advance for your help!

-J


More information about the juniper-nsp mailing list