[j-nsp] M7i and M10i problems - TRACE ROUTE

[Alex]

Giuliano,
On Juniper M-series, there is an ICMP TTL-exceeded rate-limit in place: 50 
pps per logical interface and 500 pps per box.
See http://puck.nether.net/pipermail/cisco-nsp/2006-June/031717.html
Rgds
Alex

----- Original Message ----- 
From: "Giuliano Cardozo Medalha" <giulianocm at uol.com.br>
To: <juniper-nsp at puck.nether.net>
Sent: Saturday, April 21, 2007 8:51 PM
Subject: [j-nsp] M7i and M10i problems - TRACE ROUTE


> People,
>
> We have a Juniper M10i border router.
>
> When we install this router on our network ... we are having problems
> with MTR and traceroute programs.
>
> Basically ... every trace that pass trough the router lose 70% of the
> packets.
>
> PING just works fine ... but TRACE and MTR not.
>
> Juniper saids in J-TAC that this is a default config (FACTORY DEFAULT)
> from the router.
>
> There is some command or way to change this behavior ?
>
> Thanks a lot,
>
> Giuliano
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp