[j-nsp] rate limiting per vlan in a gigabit ethernet Interface

[Erdem Sener]

Or,

 you can use firewall filters that do rate-limiting on different units.

 My point stands if you want to do CoS on these units. (sorry for the
'reply-before-reading' act) :)

Cheers,
Erdem

On 4/26/07, Erdem Sener <erdems at gmail.com> wrote:
> Hi Jose,
>
>  You need IQ pic to configuer 'per-unit-scheduler' (which is what
> you're looking for)
>
> Cheers,
> Erdem
>
> On 4/26/07, Jose Sanchez <jasjuniper at gmail.com> wrote:
> > Hi,
> >
> > Does anybody know if I can rate limit (ingress and egress) per VLAN in a
> > Gigabit Ethernet Interface.
> >
> >
> > Thank you
> >
> > Best regards
> >
> > Jose Sanchez
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>