[j-nsp] Redback(LAC) and Juniper (LNS) -- L2TP problem

[Ufuk Kahraman]

Hi,

There is Redback(LAC) and Juniper (LNS) when we try to connect we are
getting this debug print,

-------------------------------------------------------------------------------------------------------------
test#sINFO 12/12/2007 17:35:34 l2tp (interface TUNNEL l2tp:2/1078):
Processing incoming in-sequence icrq
NOTICE 12/12/2007 17:35:34 l2tp (interface TUNNEL l2tp:2/1078/2336):
Changing ifOperStatus from LowerLayerDown to Down
NOTICE 12/12/2007 17:35:34 l2tp (interface TUNNEL l2tp:2/1078/2336):
Changing effective adminState from disabled to enabled
NOTICE 12/12/2007 17:35:34 l2tp (interface TUNNEL l2tp:2/1078/2336):
Changing mibState from idle to connecting
hINFO 12/12/2007 17:35:34 l2tp (interface TUNNEL l2tp:2/1078): Processing
incoming in-sequence iccn
WARNING 12/12/2007 17:35:34 l2tp (interface TUNNEL l2tp:2/1078/2336):
Discarding proxy LCP data in incoming iccn
NOTICE 12/12/2007 17:35:34 l2tp (interface TUNNEL l2tp:2/1078/2336):
Discarding proxy authenticate in incoming iccn
NOTICE 12/12/2007 17:35:34 l2tp (interface TUNNEL l2tp:2/1078/2336):
Changing mibState from connecting to disconnecting
NOTICE 12/12/2007 17:35:34 l2tp (interface TUNNEL l2tp:2/1078/2336):
Changing mibState from disconnecting to idle



test#INFO 12/12/2007 18:44:25 l2tp (interface TUNNEL l2tp:2/1080):
Processing incoming in-sequence icrq
NOTICE 12/12/2007 18:44:25 l2tp (interface TUNNEL l2tp:2/1080/2706):
Changing ifOperStatus from LowerLayerDown to Down
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = closeDown, event = up, next
state = closed
NOTICE 12/12/2007 18:44:25 l2tp (interface TUNNEL l2tp:2/1080/2706):
Changing effective adminState from disabled to enabled
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = closed, event = open, next
state = idle
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = idle, event = icrq, next
state = txIcrp
NOTICE 12/12/2007 18:44:25 l2tp (interface TUNNEL l2tp:2/1080/2706):
Changing mibState from idle to connecting
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = txIcrp, event = txStarted,
next state = waitConnected
INFO 12/12/2007 18:44:25 l2tp (interface TUNNEL l2tp:2/1080): Processing
incoming in-sequence iccn
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = waitConnected, event = iccn,
next state = waitUpper
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = waitUpper, event =
createUpperFail, next state = txCdnOpen
NOTICE 12/12/2007 18:44:25 l2tp (interface TUNNEL l2tp:2/1080/2706):
Changing mibState from connecting to disconnecting
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = txCdnOpen, event = reset,
next state = txCdnOpen
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = txCdnOpen, event = reset,
next state = txCdnOpen
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = txCdnOpen, event =
txComplete, next state = resetIdle
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = resetIdle, event = reset,
next state = idle
NOTICE 12/12/2007 18:44:25 l2tp (interface TUNNEL l2tp:2/1080/2706):
Changing mibState from disconnecting to idle
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = idle, event = dying, next
state = dying
DEBUG 12/12/2007 18:44:25 l2tpStateMachine (interface TUNNEL
l2tp:2/1080/2706): lnsIncomingSession: state = dying, event = dead, next
state = dead
-------------------------------------

Could you tell me how can i solve this problem,
Thanks

Ufuk