[j-nsp] bringing m7i FIC online

[Dan Farrell]

I would like to thank a bunch of people that replied to me within
minutes of me sending this question in-

The proper command (from them, and it worked) is-

     request chassis pic online fpc-slot 1 pic-slot 3


The system will (or at least should) then prompt you to run the
following command-

     show chassis fpc pic-status 1


Which should show the PIC online. And when I then do a "show interfaces
terse" the ge-1/3/0 interface now appears.



Thanks again guys!


danno

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Dan Farrell
Sent: Monday, December 17, 2007 11:37 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] bringing m7i FIC online

In trying to get a connection to work on my Gigabit FIC interface, I
noticed that it appears (if I'm reading the output correctly) that the
interface is offline-

root at nap-r2-core-1> show chassis fpc pic-status
Slot 0   Online       E-FPC
 PIC 0  Online       4x 1GE(LAN), IQ2
Slot 1   Online       E-FPC
 PIC 2  Online       ASP - Integrated (Layer-2-3)
 PIC 3  Offline

I believe "PIC 3" is the FIC interface itself. I think I had seen it
labeled as "ge-1/3/0" quite awhile ago but that doesn't appear in a
"show interfaces terse" anymore, and I think that's because it's
currently offline.

So how does one bring the FIC 'online'? I checked the documentation, and
googled, and came up empty.


Thanks for any insight,


Dan Farrell
Applied Innovations Corp.
danno at appliedi.net


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp