[j-nsp] Upgrade without PCMCIA card?

jared mauch jared at puck.nether.net
Wed Dec 19 18:10:21 EST 2007


What size is your ad0 device?

Show chassis hardware detail should say... You may need to upgrade it  
first.

Jared Mauch

On Dec 19, 2007, at 5:09 PM, "chiel" <chiel at gmx.net> wrote:

> Hi all,
>
> I want to upgrade a M5 from 6.2R2.4 to 8.5R1.14. But I don't have a  
> PCMCIA card, see bellow:
>
> root> request system software add non-validate reboot /var/tmp/ 
> jinstall-8.5R1.14-export-signed.tgz
> Installing package '/var/tmp/jinstall-8.5R1.14-export-signed.tgz' ...
> Verified MD5 checksum of jinstall-8.5R1.14-export.tgz
> Adding jinstall...
>
> WARNING: This installation will not succeed.
> WARNING: The boot device is less than 256M.
> WARNING: A hardware upgrade is required.
>
> pkg_add: package /var/tmp/instmp.RJ7Ung/jinstall-8.5R1.14-export.tgz  
> fails requirements - not installed
> pkg_add: install script returned error status
>
> root>
>
>
> Is there any way to upgrade without a PCMCIA card? I coudn't find  
> anything on this mailing list/google.
>
> chiel
>
>
>
>
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list