[j-nsp] "show ip cef" equivalent on ERX ?

[German Martinez]

On Thu Feb 08, 2007, Peter Krupl wrote:

CEF ?  Cisco Express Forwarding?

> Anyone aware to the existence of a "show ip cef" equivalent on the ERX ?
> 
> Med venlig hilsen/Kind regards
> Peter Åris Krüpl
> Netværksspecialist
> 
> Ventelo Webpartner
> Århusgade 88
> 2100 København Ø
> Denmark
>  
> +45 35 25 47 54 (Direkte)
> +45 70 26 23 00 (Hovednummer)
> +45 70 26 23 01 (Telefax)
> +45 80 20 75 95 (Kundeservice)
> www.ventelo.dk
> 
> This correspondence and any attached files are for the sole use of the intended recipient(s) and may contain confidential and proprietary information. If you receive the above communication in error, please delete the message and notify the sender immediately. Do not distribute any part of this e-mail as the confidentiality stipulation adheres even in the event of mistransmission. Ventelo reserves the right to monitor all email communications through its network.
> <Note> If you are in doubt if you are the intended recipient please use your magic crystal ball. I might have mistyped the "intended" recipient adress, or maybe not. </Note>
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/juniper-nsp/attachments/20070209/85f4121e/attachment.bin