[j-nsp] problem with policer

[Lukasz Trabinski]

Hello

We have strange problem with policer on etherchannel interface

There is configuration

lukasz at r2-re1> ...cal-routers tpnet interfaces ae1 unit 514

description "xxx [cat5-d13:Gi2/0/1] xxx";
vlan-id 514;
family inet {
    policer {
        input 175m;
        output 350m;
    }
    address xxx.xxx.xx.xxx/30;
}


lukasz at r2-re1> show configuration firewall policer 350m
logical-interface-policer;
if-exceeding {
    bandwidth-limit 350m;
    burst-size-limit 650k;
}
then discard;


below is output from show interfaces ae1.514 extensive:


lukasz at r2-re1> show interfaces ae1.514 extensive
  Logical interface ae1.514 (Index 127) (SNMP ifIndex 621) (Generation 194)
    Description: xxx [cat5-d13:Gi2/0/1] xxx
    Flags: SNMP-Traps VLAN-Tag [ 0x8100.514 ]  Encapsulation: ENET2
    Statistics        Packets        pps         Bytes          bps
    Bundle:
        Input :   49652726334      98080 16305656634443    206869120
        Output:   56668694351     111049 28066800393407    428369072
    Link:
      ge-4/0/0.514
        Input :   12364812455      24467 4048362723330     51926808
        Output:   14187994897      28442 7017873295930    110316088
      ge-4/0/4.514
        Input :   12414159614      24601 4077845428268     52018640
        Output:   14150801027      27720 6992847311403    107773872
      ge-4/1/4.514
        Input :   12466507576      24949 4117274836674     52820680
        Output:   14170174949      27322 7043901269464     99596368
ge-4/1/5.514
        Input :   12407246689      24063 4062173646171     50102992
        Output:   14159723478      27565 7012178516610    110682744
    Marker Statistics:   Marker Rx     Resp Tx   Unknown Rx   Illegal Rx
      ge-4/0/0.514               0           0            0            0
Marker Statistics:   Marker Rx     Resp Tx   Unknown Rx   Illegal Rx
      ge-4/0/0.514               0           0            0            0
      ge-4/0/4.514               0           0            0            0
      ge-4/1/4.514               0           0            0            0
      ge-4/1/5.514               0           0            0            0
    Protocol inet, MTU: 1500, Generation: 224, Route table: 6
      Flags: None
      Filters: Input: sampling, Output: sampling
      Policer: Input: 175m-ae1.514-inet-i, Output: 350m-ae1.514-log_int-o
      Addresses, Flags: Is-Preferred Is-Primary
        Destination: xxx.xxx.xx.xxx/30, Local: xxx.xxx.xx.xx,
        Broadcast: xxx.xxx.xxx.xxx, Generation: 349


when we check policer, we can see that policer on output doesn't work


lukasz at r2-re1> show policer 350m-ae1.514-log_int-o
Policers:
Name                                              Packets
350m-ae1.514-log_int-o                                  0

lukasz at r2-re1> show policer 175m-ae1.514-inet-i
Policers:
Name                                              Packets
175m-ae1.514-inet-i                             900429573


Any idea, bug soft, wrong configuration?


lukasz at r2-re1> show version
Hostname: r2-re1
Model: m320
JUNOS Base OS boot [8.0R2.8]
JUNOS Base OS Software Suite [8.0R2.8]
JUNOS Kernel Software Suite [8.0R2.8]
JUNOS Packet Forwarding Engine Support (M320) [8.0R2.8]
JUNOS Routing Software Suite [8.0R2.8]
JUNOS Online Documentation [8.0R2.8]
JUNOS Crypto Software Suite [8.0R2.8]



-- 
Lukasz Trabinski