[j-nsp] Unequal Path Loadbalance in OSPF?

[Tech Zone]

Try set the interface metric under OSPF. 
 
Regards,
Sean



----- Original Message ----
From: Andrew Mulheirn <Andrew.Mulheirn at telindus.co.uk>
To: Piotr Marecki <peter at mareccy.org>; Farhan Jaffer <bandhani at gmail.com>; juniper-nsp at puck.nether.net
Sent: Wednesday, January 10, 2007 1:23:11 AM
Subject: Re: [j-nsp] Unequal Path Loadbalance in OSPF?

Hi - that's correct - variance is EIGRP-specific:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/
iprrp_r/ip2_s3g.htm#wp1042783

Andy. 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Piotr Marecki
Sent: 09 January 2007 16:18
To: Farhan Jaffer; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Unequal Path Loadbalance in OSPF?

Ehlo,

AFAIK variance knob is relevant only for EIGRP on CSCO boxes. Generally
, it may be difficult to achieve something other that ECMP in OSPF due
to protocol characteristics ( SPF etc ).If you want to achieve some
unequal load balancing on your IGP domain you can try MPLS TE LSP
unequal load-balance with bandwith statement under [edit protocols rsvp
load-balance].

regards

Piotr Marecki

----- Original Message -----
From: "Farhan Jaffer" <bandhani at gmail.com>
To: <juniper-nsp at puck.nether.net>
Sent: Tuesday, January 09, 2007 4:38 PM
Subject: [j-nsp] Unequal Path Loadbalance in OSPF?


> How to configure unequal load balacing in OSPF to the same destination
via
> different paths ?
>
> In Cisco, we have 'variance' factor for this purpose, is there
anything
> equivalent in Junos ?
>
> Regards
> -FJ
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp 

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

This e-mail is private and may be confidential and is for the intended recipient only.  If misdirected, please notify us by telephone and confirm that it has been deleted from your system and any copies destroyed.  If you are not the intended recipient you are strictly prohibited from using, printing, copying, distributing or disseminating this e-mail or any information contained in it.  We use reasonable endeavours to virus scan all e-mails leaving the Company but no warranty is given that this e-mail and any attachments are virus free.  You should undertake your own virus checking.  The right to monitor e-mail communications through our network is reserved by us. 



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp






__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com