[j-nsp] multiprotocol bgp and bgp reflection

[Benny Sumitro]

Hi,

The configuration is the same like configuring normal route reflector except you must enable family inet-vpn for L3VPN. The important thing is you must have a LSP to all PEs because without LSP or reachability, the RR will mark the routes as unusable and not advertised it to the PEs.

Cheers,
Benny

snort bsd <snortbsd at yahoo.com.au> wrote: Hi all:

Just read through the white paper "BGP Route
Reflection in Layer 3 VPN Networks". Usually MBGP is
activated on PE routers; ie. PE-to-PE and P routers
need no configuration of MBGP. But with the Router
Reflectors in the middle of PATHs of PE-to-PE, how
could this be implemented? Does anyone here ever
configured this?

Thanks in Advance





Send instant messages to your online friends http://au.messenger.yahoo.com 
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


 
---------------------------------
The fish are biting.
 Get more visitors on your site using Yahoo! Search Marketing.