[j-nsp] How to debug or trace ntp packets?

[Paul Goyette]

There are no traceoptions for ntp.

However, you can use "monitor interface traffic" command
to capture packets.

Paul Goyette
Juniper Networks Customer Service
JTAC Senior Escalation Engineer and
Security Incident Response Team 
PGP Key ID 0x53BA7731 Fingerprint:
  FA29 0E3B 35AF E8AE 6651
  0786 F758 55DE 53BA 7731 

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Markus Zielonka
> Sent: Monday, January 29, 2007 2:59 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] How to debug or trace ntp packets?
> Importance: High
> 
> Hello NG,
> 
> i have configure NTP.
> 
> peter at router# show
> server 194.25.1.215;
> source-address 62.225.19.80;
> 
> [edit system ntp]
> 
> How to set a traceoption or a debug to see the ntp packets?
> 
> Thanks for Help
> 
> Markus
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>