[j-nsp] Strange error on AS PIC

[Gökhan Gümüş]

Hi Dan,

Thanks for your update.

Now case is in JTAC.I havent got one more AS PIC :(

Kind regards,

Gokhan


On 5/31/07, Dan Rautio <drautio at juniper.net> wrote:
>
> Hi Gokhan,
>
> I think opening a jtac case is an excellent idea.  This doesn't look like
> any bad hardware.  It looks more like over-loading the as-pic with too many
> services.  Of course, this would need to be investigated by looking at your
> config, number of flows, etc that can be done when you open the support
> case.
>
> Do you have another as-pic you could try to move some service-sets to?
>
> - Dan
>
>
> -----Original Message-----
> From: Gökhan Gümüs [mailto:ggumus at gmail.com]
> Sent: Thursday, May 31, 2007 1:56 AM
> To: Dan Rautio
> Subject: Re: [j-nsp] Strange error on AS PIC
>
>
> Hi Dan,
>
> Thanks for reply first of all.
>
> No,i havent made any config changes lately.Just adding 3-4 more
> service-set for NAT operations for our customers.Also i always see this
> memory loading but in these days when i got that strange error message,i
> understand that situation will be critical in next days.
>
> Have you any recommendation about that issue?Also i want to open a case to
> JTAC and maybe it needs to making  a RMA for this card...
>
> Kind regards,
>
> Gokhan
>
>
> On 5/31/07, Dan Rautio <drautio at juniper.net> wrote:
> Hi Gokhan,
>
> It appears your as pic is running out of memory.  Have you made any config
> changes lately that would increase the load on the pic?
>
> - Dan
>
> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net
> > [mailto: juniper-nsp-bounces at puck.nether.net] On Behalf Of G?n G?r>>
> Sent: Wednesday, May 30, 2007 9:48 AM
> > To: juniper-nsp at puck.nether.net
> > Subject: [j-nsp] Strange error on AS PIC
> >
> >
> > Hi guys,
> >
> > I have a strange problem with our AS PIC.We are using that AS
> > PIC card for
> > NAT operation for our L3 VPN customers.In these days NAT
> > operation is not
> > working on some specific customers.I am using JUNOS 7.6 R4.3.
> >
> > When NAT doesnt work,i get this output.
> >
> > xxx at fulya-M10i-re1> show services stateful-firewall flows
> > service-set ABC
> >
> > *error: libservicesui: ipc_pipe_read() failed - Unknown error: 0
> > ----------------------------------------------------------------->  ?*
> > **
> > **
> > Also i get these outputs from my syslog messages when i got
> > these error.
> >
> > May 30 17:39:08  (FPC Slot 0, PIC Slot 2) Entered orange
> > memory zone 300 ms
> > ago
> > May 30 17:39:17  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 800 ms
> > ago
> > May 30 17:39:24  (FPC Slot 0, PIC Slot 2) Entered orange
> > memory zone 800 ms
> > ago
> > May 30 17:39:25  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 300 ms
> > ago
> > May 30 17:39:27  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 300 ms
> > ago
> > May 30 17:39:27  (FPC Slot 0, PIC Slot 2) Entered green
> > memory zone 300 ms
> > ago
> > May 30 17:39:28  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 500 ms
> > ago
> > May 30 17:39:28  (FPC Slot 0, PIC Slot 2) Entered green
> > memory zone 500 ms
> > ago
> > May 30 17:39:29  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 500 ms
> > ago
> > May 30 17:39:29  (FPC Slot 0, PIC Slot 2) Entered green
> > memory zone 500 ms
> > ago
> > May 30 17:39:33  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 900 ms
> > ago
> > May 30 17:39:34  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 900 ms
> > ago
> > May 30 17:39:34  (FPC Slot 0, PIC Slot 2) CPU utilization
> > (86.59 percent)
> > exceeded threshold
> > May 30 17:39:35  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 800 ms
> > ago
> > May 30 17:39:36  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 800 ms
> > ago
> > May 30 17:39:36  (FPC Slot 0, PIC Slot 2) CPU utilization
> > (83.15 percent) ok
> > May 30 17:39:37  (FPC Slot 0, PIC Slot 2) Entered yellow
> > memory zone 300 ms
> > ago
> > May 30 17:39:37  (FPC Slot 0, PIC Slot 2) Entered green
> > memory zone 300 ms
> > ago
> > May 30 17:39:41  (FPC Slot 0, PIC Slot 2) CPU utilization
> > (88.63 percent)
> > exceeded threshold
> > May 30 17:39:44  (FPC Slot 0, PIC Slot 2) CPU utilization
> > (81.04 percent) ok
> >
> >
> > Has anyone any experience about that messages?
> >
> >
> > Thanks,
> >
> >
> > Gokhan
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
>
>
>
> --
> Gokhan Gumus JNCIS #1255
>



-- 
Gokhan Gumus JNCIS #1255