[j-nsp] Problem with boot after JunOS upgrade (7.5 -> 8.1R3.3)

[Alex]

Yevgeniy,
Try this:
ok>ls packages
ok>boot packages/jkernel-8.1R3.3
Rgds
Alex

----- Original Message ----- 
From: "Yevgeniy Voloshin" <yevgeniy.voloshin at gmail.com>
To: <juniper-nsp at puck.nether.net>
Sent: Friday, June 08, 2007 6:18 PM
Subject: Re: [j-nsp] Problem with boot after JunOS upgrade (7.5 -> 8.1R3.3)


> The same problem, but now m7i stop here:
> Award Modular BIOS v4.51PG, An Energy Star Ally
> Copyright (C) 1984-98, Award Software, Inc.
> 
> BIOS Version 1.8
> 09/18/2003-i440BX-SMC67X-2A69TU00C-00
> 
> Will try to boot from :
> PCMCIA ATA Flash Card
> Compact Flash
> Primary IDE Hard Disk
> Ethernet
> 
> Trying to Boot from Ethernet
> 
> Intel UNDI, PXE-2.0 (build 078)
> Copyright (C) 1997,1998,1999 Intel Corporation
> 
> CLIENT MAC ADDR: 00 A0 A5 5C 53 BB
> DHCP.....|
> PXE-E51: No DHCP or BOOTP offers received
> 
> PXE-M0F: Exiting Intel PXE ROM.
> PXE-M0F: Exiting Intel PXE ROM.
> 
> Trying to Boot from PCMCIA ATA Flash Card
> 
> Trying to Boot from Compact Flash
> 
> Trying to Boot from Primary IDE Hard Disk
> Loading /boot/loader
> Console: serial port
> BIOS drive A: is disk0
> BIOS drive C: is disk1
> BIOS 639kB/523264kB available memory
> 
> FreeBSD/i386 bootstrap loader, Revision 0.8
> (builder at vouivre.juniper.net, Thu Apr 12 00:09:54 GMT 2007)
> Loading /boot/defaults/loader.conf
> Unable to load kernel:
> Aborted!
> -
> Hit [Enter] to boot immediately, or space bar for command prompt.
> Booting [kernel]...
> can't load 'kernel'
> can't load 'kernel.old'
> 
> Type '?' for a list of commands, 'help' for more detailed help.
> ok ?
> Available commands:
> reboot reboot the system
> heap show heap usage
> bcachestat get disk block cache stats
> boot boot a file or loaded kernel
> autoboot boot automatically after a delay
> help detailed help
> ? list commands
> show show variable(s)
> set set a variable
> unset unset a variable
> more show contents of a file
> nextboot set next boot device
> include read commands from a file
> ls list files
> load load a kernel or module
> unload unload all modules
> lsmod list loaded modules
> pnpscan scan for PnP devices
> ok
> 
> 
> TIA!
> 
> ---
> Yev.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp