[j-nsp] JunOS 6.3 not logging BGP state transitions

[Ben Bird]

On Tue, 12 Jun 2007 16:15:29 -0700, Jared Gillis <jared at sonic.net> wrote:

>Hi,
>
>I manage a number of M40 routers running JunOS 6.3. I have the log-updown
>directive enabled in the protocol bgp hierarchy (via an apply-group), but I get
>no syslog messages anywhere when a BGP session goes down or comes up. I'm
>logging all daemon messages level info or higher to a syslog host and locally.
>I've tried manually configuring log-updown at each level of the bgp
>configuration (globally, under a group, or under individual neighbors), I can't
>get any BGP syslog messages at all.
>Is there a known issue with this on this code rev? Is there other configuration
>necessary?

Do you have anything configured at the [edit routing-options options syslog] hierarchy?  This will affect RPD only, and
will supercede the 'daemon' facility configuration(s) under [edit system syslog].

Regards,
Ben