[j-nsp] BFD for MPLS LSP Stability

[Leigh Porter]

If an LSP were to fail shouldn't it be torn down anyway (unless it's all
statically provisioned I guess)

--
Leigh


alaerte vidali wrote:
> Have you used BFD for detecting failure on LSP?
> If so, do you get false positives?
>
> tks,
> Alaerte
>
> part of feature text in Juniper page:
> ===========================================================
> You can configure Bidirectional Forwarding Detection (BFD) on MPLS
> IPv4 LSPs as outlined in the Internet draft
> draft-ietf-bfd-mpls-02.txt, BFD for MPLS LSPs. You can configure BFD
> for LSPs using either LDP or RSVP as the signaling protocol. BFD is
> used as a periodic Operation, Administration, and Maintenance (OAM)
> feature for LSPs to detect LSP data plane faults.
> ==========================================================
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>