[j-nsp] BGP VPLS support

[Yastrebov, Valery]

table-label option in routing-instance must fix it

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Leigh Porter
Sent: Monday, June 18, 2007 2:05 PM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] BGP VPLS support

Hey folks,

When using MPLS on JUNOS a directly connected interface route on a PE
router is only assigned a label if there is a route on the PE router
that uses this interface (static or OSPF or BGP). When a route is
present that uses this interface then a label is assigned and the route
makes it into bgp.l3vpn.0

Is there a way of changing this behavior? I would like to plug some
servers directly into a PE router routing-instance and have then
reachable, but the interface routes do not make it to the l3vpn table,
even if I explicitly ask them to be with a policy.

Thanks, folks,
Leigh Porter


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp