[j-nsp] L2 connection between Interfaces
Hahn, Ch
HahnC at t-systems.com
Thu Mar 29 03:54:34 EST 2007
>
> > does anybody know an easy way to connect two router
> interface on an M5
> > at layer 2? I would like to use this as a temporary
> solution to switch
> > frames between these interfaces. Is this achievable by using
> > ethernet-ccc?
>
> Yes. You want Layer 2 switching cross-connect, using
> "interface-switch":
>
> http://www.juniper.net/techpubs/software/junos/junos81/swconfi
> g81-mpls-apps/html/ccc-tcc-config3.html#1013938
> http://www.juniper.net/techpubs/software/junos/junos81/swconfi
> g81-mpls-apps/html/ccc-tcc-config11.html
That's what I want to know.
Thanks Steinar.
best wishes,
Christian
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list