[j-nsp] P-4FE-TX Output Drops

Ebben Aries earies at uci.net
Thu Mar 29 15:09:25 EST 2007


Hello all,

This is a weird one...... I have a P-4FE-TX that has one interface that is 
displaying the following.

  Output errors:
    Carrier transitions: 0, Errors: 0, Drops: 29052, Collisions: 0, Aged 
packets: 0, FIFO errors: 0, HS link CRC errors: 0, MTU errors: 0, Resource 
errors: 0
  Egress queues: 4 supported, 4 in use
  Queue counters:     Queued packets  Transmitted packets   Dropped packets
 0 best-effort                    3278              0                    0
 1 expedited-forwarding      0                     0                    0
 2 assured-forwarding          0                     0                    0
 3 network-control             29782             0                29052

This is strictly a p2p ethernet link that was working until the 
following......  This interface was put into an 802.3ad bundle attached to 
ae0.0 (this is when it started to drop everything).  The interface was then 
removed and now displays the above.

It appears that BE is neither transmitting nor dropping the packets while 
network-control is dropping virtualy everything.  The interface can RX 
traffic just fine.

BTW, other interfaces on the same P-4FE-TX work fine and there are no firewall 
filters attached to this interface.

Anyone ran into this before ??

--

Ebben


More information about the juniper-nsp mailing list