[j-nsp] Source-Routing on J-Series and M-Series

[Stacy W. Smith]

It's enabled by default. You can turn it off at the [edit chassis]  
configuration hierarchy.

[edit chassis]
lab at Denver# set no-source?
Possible completions:
   no-source-route      Don't enable IP source-route processing


--Stacy


On Mar 30, 2007, at 8:29 AM, Rodrigo Santos wrote:

> Hi All,
> I would like to configure/enable the source-routing on Juniper  
> routers (J6300 and M7i). Somebody could say me as to make this  
> configuration?
>
> Thanks,
> Rodrigo Santos
>
> _________________________________________________________________
> Live Search Maps – find all the local information you need, right  
> when you need it. http://maps.live.com/?icid=hmtag2&FORM=MGAC01
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp