[j-nsp] Exporting inet.0 BGP routes into a VRF instance

[Chuck Anderson]

I'm getting a 404 on the URL below.  Does anyone have a copy of 
L3VPN_migration.zip that they can share?

Thanks.

On Thu, Mar 16, 2006 at 10:00:43PM +0100, Andre Stiphout wrote:
> 
> Nice example on inet.0/vrf route exchange:
> <http://www.apricot2006.net/slides/tutorial/tuesday/L3VPN_migration.zip>
> 
> cheers, andre
> 
> On Thu, 16 Mar 2006 21:42:10 +0100, Rick Wilkerson  
> <rick.wilkerson at digi-muse.com> wrote:
> 
> > Some good information in the feature guide section of the documentation  
> > on
> > simplifed instance sharing.  Harshit is absolutely correct, however  
> > there is
> > a solution shown there using a rib table in addition to auto-export.
> >
> > Rick
> >
> > -----Original Message-----
> > From: juniper-nsp-bounces at puck.nether.net
> > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Harshit Kumar
> > Sent: Thursday, March 16, 2006 1:57 PM
> > To: Rafal Szarecki (WA/EPO); Mellott, Eric; juniper-nsp at puck.nether.net
> > Subject: Re: [j-nsp] Exporting inet.0 BGP routes into a VRF instance
> >
> > BTW, auto-export is not going to work between inet.0 and a vrf.
> > It works between VRFs.
> >
> > -harshit
> >
> >> -----Original Message-----
> >> From: juniper-nsp-bounces at puck.nether.net
> >> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Rafal
> >> Szarecki (WA/EPO)
> >> Sent: Wednesday, March 15, 2006 2:02 PM
> >> To: Mellott, Eric; juniper-nsp at puck.nether.net
> >> Subject: Re: [j-nsp] Exporting inet.0 BGP routes into a VRF instance
> >>
> >> There is at least few way to do this.
> >>
> >> One of then can be use of route-target community in global routing
> >> table and VRF. Then "auto-export" has to be used. I never try this,
> >> but gives hope to simple configuration.
> >>
> >> Other option is use of rib-group xxxx [inet.0 vprname.inet.0], and
> >> then run BGP on this group xxxx, with policy.