[j-nsp] NetFlow on M7i
Eric Van Tol
eric at atlantech.net
Thu May 24 12:01:20 EDT 2007
It actually does both.
-evt
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
> TCIS List Acct
> Sent: Thursday, May 24, 2007 11:55 AM
> To: Pierantozzi Craig
> Cc: NSP Juniper
> Subject: Re: [j-nsp] NetFlow on M7i
>
>
>
> Pierantozzi Craig wrote:
> > Investigate SCU/DCU. It might meet your needs.
> >
> >
> <http://www.juniper.net/techpubs/software/junos/junos82/swconf
> ig82-network-interfaces/html/interfaces-family-config38.html>
> >
>
> Looking at that link, it talks about counting packets, but
> not counting byte
> in/out counts. Does it actually produce bandwidth volume
> data (in bytes), or
> just number of "packets" in/out?
>
> --Mike
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list