[j-nsp] Re : juniper - cisco l2circuit problem

sthaug at nethelp.no sthaug at nethelp.no
Wed May 30 06:47:12 EDT 2007


> Its Wrong you don't need to OSM modules on SUP720 u can use xconnect
> vlan100 , the problem is was on Juniper side it cannot receive vlan
> interface for attachment circuit :)) 

Not sure what you mean here - VLAN based Martini tunnels between Cisco
and Juniper work just fine.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no


More information about the juniper-nsp mailing list