[j-nsp] Strange error on AS PIC

[Dan Rautio]

Hi Gokhan,

It appears your as pic is running out of memory.  Have you made any config changes lately that would increase the load on the pic?

- Dan

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Gökhan Gümüs
> Sent: Wednesday, May 30, 2007 9:48 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Strange error on AS PIC
> 
> 
> Hi guys,
> 
> I have a strange problem with our AS PIC.We are using that AS 
> PIC card for
> NAT operation for our L3 VPN customers.In these days NAT 
> operation is not
> working on some specific customers.I am using JUNOS 7.6 R4.3.
> 
> When NAT doesnt work,i get this output.
> 
> xxx at fulya-M10i-re1> show services stateful-firewall flows 
> service-set ABC
> 
> *error: libservicesui: ipc_pipe_read() failed - Unknown error: 0
> ----------------------------------------------------------------->  ?*
> **
> **
> Also i get these outputs from my syslog messages when i got 
> these error.
> 
> May 30 17:39:08  (FPC Slot 0, PIC Slot 2) Entered orange 
> memory zone 300 ms
> ago
> May 30 17:39:17  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 800 ms
> ago
> May 30 17:39:24  (FPC Slot 0, PIC Slot 2) Entered orange 
> memory zone 800 ms
> ago
> May 30 17:39:25  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 300 ms
> ago
> May 30 17:39:27  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 300 ms
> ago
> May 30 17:39:27  (FPC Slot 0, PIC Slot 2) Entered green 
> memory zone 300 ms
> ago
> May 30 17:39:28  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 500 ms
> ago
> May 30 17:39:28  (FPC Slot 0, PIC Slot 2) Entered green 
> memory zone 500 ms
> ago
> May 30 17:39:29  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 500 ms
> ago
> May 30 17:39:29  (FPC Slot 0, PIC Slot 2) Entered green 
> memory zone 500 ms
> ago
> May 30 17:39:33  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 900 ms
> ago
> May 30 17:39:34  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 900 ms
> ago
> May 30 17:39:34  (FPC Slot 0, PIC Slot 2) CPU utilization 
> (86.59 percent)
> exceeded threshold
> May 30 17:39:35  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 800 ms
> ago
> May 30 17:39:36  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 800 ms
> ago
> May 30 17:39:36  (FPC Slot 0, PIC Slot 2) CPU utilization 
> (83.15 percent) ok
> May 30 17:39:37  (FPC Slot 0, PIC Slot 2) Entered yellow 
> memory zone 300 ms
> ago
> May 30 17:39:37  (FPC Slot 0, PIC Slot 2) Entered green 
> memory zone 300 ms
> ago
> May 30 17:39:41  (FPC Slot 0, PIC Slot 2) CPU utilization 
> (88.63 percent)
> exceeded threshold
> May 30 17:39:44  (FPC Slot 0, PIC Slot 2) CPU utilization 
> (81.04 percent) ok
> 
> 
> Has anyone any experience about that messages?
> 
> 
> Thanks,
> 
> 
> Gokhan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>