[j-nsp] TX BHQ CRC error!

[Paolo Autore]

Lu;
 Don't worry about it-- it just that the ios is trying to do a range
read and the Sfp's or whatever optics you have on the interface doesn't
support it-- I have the same problem after an upgrade---

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Lukasz
Trabinski
Sent: Monday, November 05, 2007 15:48
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] TX BHQ CRC error!

Hello

I have two M7i routers with OC-12 ATM and 1 G/E IQ interfeces.
Sometimes I can find in system logs something like this (on both
routers):

Nov  5 16:38:32 cfeb HGE(0/2): link 0 hge TX BHQ CRC error!
Nov  5 16:38:32 cfeb register 0xfe9a040a value 0x1

Nov  5 15:38:32 cfeb HGE(0/3) link 0: error set SFFP I2C read addr
0x0175
Nov  5 15:38:32 cfeb HGE(0/3)(0), SFP 3: in sfp_read_range, failed to
read SFP DIAGNOSTICS address 117

It happens more often after upgrade junos to 8.4R2.3. What it means?



-- 
Lukasz Trabinski
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp