[j-nsp] Enquiry on J4350 RAM/FLASH

[Lawrence Wong]

BTW, just wondering, has anyone tried going beyond the 2GB "limit" for the J4350 series? Any experiences to share?

TIA!

----- Original Message ----
From: Jared Mauch <jared at puck.nether.net>
To: Eugeniu Patrascu <eugeniu.patrascu at gmail.com>
Cc: Lawrence Wong <lawrencewong72 at yahoo.com>; juniper-nsp at puck.nether.net
Sent: Tuesday, November 20, 2007 4:32:38 AM
Subject: Re: [j-nsp] Enquiry on J4350 RAM/FLASH


    3.2) remember that sometimes vendors hedge themselves on the hardware
side.  If it says it can only do 1GB of ram, try putting in 2x1GB dimms.  It
just may work.  lots of folks figured this out with the NPE-225 stuff and
Cisco finally said "Ok, it's certified and works".  Their level of risk for
their customerbase may be different than yours.  If you're going aftermarket
this is likely true, and you may see additional wins from a few extra bucks
on ram.

    - Jared

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.


      ____________________________________________________________________________________
Be a better sports nut!  Let your teams follow you 
with Yahoo Mobile. Try it now.  http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ