[j-nsp] J6350's interface down/up

[usacox]

Dear all,

Many thanks for your replys.

I am waiting under this condition with no-autonego setting a littile  
more.

My center's default setting is "auto-nego".
I will suggest "no-auto-negotiation" for default setting.

Many thanks


On Oct 17, 2007, at 12:27 AM, Sabri Berisha wrote:

> On Tue, Oct 16, 2007 at 09:18:30AM -0600, Brandon Bennett wrote:
>
> Hi,
>
>> When using 10 or 100.  There is no such thing at 1000-half (at least
>> defined in the standard).
>
> That's, correct. However, the following config is valid:
>
>     ge-0/0/3 {
>         speed 100m;
>         link-mode full-duplex;
>         gigether-options {
>             no-auto-negotiation;
>         }
>         unit 0 {
>             family inet {
>                 address 10.0.3.2/24;
>             }
>         }
>     }
>
> When linked to another ge interface, you get:
>
> ge-5/0/3 {
>     unit 0 {
>         family inet {
>             address 10.0.3.1/24;
>         }
>     }
> }
>
>   Autonegotiation information:
>     Negotiation status: No-autonegotiation
>     Link partner:
>         Link mode: Half-duplex, Flow control: None, Remote fault: OK,
>         Link partner Speed: 100 Mbps
>
>
> Thanks,
>
> -- 
> Sabri