[j-nsp] apply-path and interface addresses

[Pekka Savola]

Hi,

Apply-path is a nice feature, but for some reason it doesn't seem to 
work for interface addresses, e.g.:

apply-path "interfaces lo0 unit 0 family inet address <*>";
or:
apply-path "interfaces <*> unit <*> family inet address <*>";
or:
apply-path "interfaces <*> unit <*> family inet address <*>/32";

Am I missing something or is it impossible to use apply-path when an 
address also includes the prefix length?

These would have two main applications:
  1) gather all the addresses of the router on loopback interfaces
     (e.g. because due to tunnel PIC encapsulation those addresses used
     as tunnel endpoints must be special-handled in firewall filters)
  2) gather some special physical interface-related addresses
    a) with the same prefix mask as in config (e.g., 1.1.1.1/30 stays
       the same)
    b) replacing the prefix mask in config with /32 or /128 (1.1.1.1/30
       becomes 1.1.1.1/32).

-- 
Pekka Savola                 "You each name yourselves king, yet the
Netcore Oy                    kingdom bleeds."
Systems. Networks. Security. -- George R.R. Martin: A Clash of Kings