[j-nsp] monitor

[Robert Holtz]

You could also use a firewall filter to syslog traffic and accept
everything.  Apply this to the interface you want to watch and you'll catch
source/dest and tcp port crossing the int.

On 9/5/07, Gunjan GANDHI (BR/EPA) <gunjan.gandhi at ericsson.com> wrote:
>
> Simple answer, you cannot, unless you sniff on a device connected to the
> router (like a switch)
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:
> juniper-nsp-bounces at puck.nether.net] On Behalf Of M.Mihailidis
> Sent: Wednesday, 5 September 2007 8:26 PM
> To: Rafal Szarecki
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] monitor
>
> and how can i see traffic transit the router???
> ----- Original Message -----
> From: Rafał Szarecki
> To: M.Mihailidis
> Cc: juniper-nsp at puck.nether.net
> Sent: Wednesday, September 05, 2007 1:22 PM
> Subject: Re: [j-nsp] monitor
>
>
> This command monitor only traffic originated or terminated on local
> routing engine. You do not see packet which transit through the router
> (received on one interface and send via other)
>
>
> 2007/9/5, M.Mihailidis <mixalism at gmail.com>:
>    hello guys i want to monitor  a interface to see what source address it
> is using when i try to ping  a certain address
>    i used "monitor traffic interface ge-0/0/1 extensive"
>    and all i got was the rip routing updates as output.
>    any suggestions?
>    _______________________________________________
>    juniper-nsp mailing list juniper-nsp at puck.nether.net
>    https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>
>
> --
> Rafał Szarecki JNCIE-M/T, JNCIP-E
> +48602418971
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>