[j-nsp] M120 hardware configuration

[Erdem Sener]

 Hey Louis,

   Yup, that's probably why the configurator (which I must say I've
never used) fails. Reno, here's another URL that might help for
clarifying different FPC's and some other stuff (follow the next signs
:))

http://www.juniper.net/techpubs/hardware/m120/m120-pic/m120-pic-title.html

Cheers,
Erdem

On 9/17/07, Louis Young <louisyoung7911 at gmail.com> wrote:
>
> Hi all,
>
> I don't think this is what Rendo was trying to know. That is not related to
> any PIC combination stuff.
>
> What Rendo tried to know is how to make hardware configuration using system
> configurator just like dynamic configuration tools on Cisco website.
>
> There are normally 4 types of FPCs(flexible PIC concentrator, aka. mother
> card holding PICs) on M120, cFPC/FPC1/FPC2/FPC3, each type holding different
> category of PICs.
>
> Normally PICs with total bandwidth under 1Gbps(inclusive) are categorized as
> type 1 PIC and to be held by FPC1,
> PICs whose bandwidth between 4Gbps and 10Gbps are categorized as type 2 PIC
> and to be held by FPC2, etc.
> ...
>
> I think this is what Rendo was looking for.
>
> Just my 0.02 cents.
>
> Kind Regards,
> Louis
>
>
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Erdem Sener
> Sent: 2007$BG/(B9$B7n(B17$BF|(B 14:30
> To: rendo
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] M120 hardware configuration
>
> Hi Rendo,
>
>  Sorry I've read "M20" while I should read "M120" :)
>
>  As far as I know there are no prohibited PIC combinations on M120.
> You can refer to release notes documents for further information.
>
> Hope this helps,
> Erdem
>
> On 9/17/07, rendo <rendo.aw at gmail.com> wrote:
> > Hi Erdem,
> >
> > PSN-2007-0-023 seems only valid for M5, M10, M20, M40, M40e, M160,
> > M320, J20.
> > Does it mean there is no limitation for M120?
> >
> > Thanks.
> >
> > -rendo-
> >
> > On 9/17/07, Erdem Sener <erdems at gmail.com> wrote:
> > >
> > > Hi Rendo,
> > >
> > > Juniper Technical Bulletin PSN-2007-01-023 summarizes the PIC
> > > combination notes for different platforms (FPCs).
> > >
> > > Cheers,
> > > Erdem
> > >
> > > On 9/17/07, rendo <rendo.aw at gmail.com> wrote:
> > > > Hi,
> > > >
> > > > Just wondering, does someone here know about the hardware
> > > > configuration limitation in M120? Or maybe is there any specific
> > > > datasheet/document
> > > for
> > > > this?
> > > >
> > > > I need this information because I just found that when I was using
> > > > configurator tool, I can't put 4GE PIC and AS PIC in the same slot.
> > > >
> > > > I am trying to find at Juniper website but still no luck.
> > > >
> > > > Thanks.
> > > >
> > > > -rendo-
> > > > _______________________________________________
> > > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > > >
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>