[j-nsp] Logical routers

[Erdem Sener]

Hi,

  Different units of the same physical interface cannot be in
different logical routers. You can configure vlans in a logical
router, but the whole physical port has to be assigned.

Cheers,
Erdem

On 9/19/07, DWINKWORTH at wi.rr.com <DWINKWORTH at wi.rr.com> wrote:
> Can the interfaces be logical interfaces or must they be physical?
>
> I'm curious if I could divide up VLANs on an ethernet interface into
> different, segregated, logical routers...
>
> ----- Original Message -----
> From: Eric Van Tol <eric at atlantech.net>
> Date: Wednesday, September 19, 2007 12:50 pm
> Subject: [j-nsp] Logical routers
> To: juniper-nsp at puck.nether.net
>
> > Can anyone tell me which release started supporting complete
> > segregationof logical-routers with regard to configuration and
> > show commands?  I
> > upgraded a router from 8.0 to 8.4 today and noticed that now when
> > doing'set cli logical-router', I can only see the interfaces
> > belonging to
> > that logical-router and configure only that logical-router.  I looked
> > through the release notes, but can't find it, so maybe I'm looking in
> > the wrong spot.
> >
> > I love this enhancement, by the way.  Thumbs up!
> >
> > -evt
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>