[j-nsp] GRE Tunnels

[Piotr Marecki]

Ehlo,

You'd need Tunnel/AS/multiserice pics to configure full blown gre ( or for 
that matter any tunnel intf )
( well , unless you have MX series , where you can configure FPC to do extra 
loop services ).
There is also possibilty to do some RE originated gre intf ( interface gre ) 
, but it's rather for lab/routing protocol signalization tunneling , not for 
forwarding high volume of production traffic :>>

rgrds

Piotr Marecki

----- Original Message ----- 
From: "varaillon" <j.varaillon at cosmoline.com>
To: <juniper-nsp at puck.nether.net>
Sent: Wednesday, September 26, 2007 10:53 AM
Subject: [j-nsp] GRE Tunnels


> Hi,
>
> Do we need a specific hardware equipment to configure GRE tunnel on 
> Juniper
> M10i router?
>
> Is this what's called Tunnel PIC?
>
> Or is there a way like in Cisco to configure a GRE interface despite the
> hardware part?
>
> Thanks!
>
> Christophe
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp