[j-nsp] SNMP for logical routers

Eric Van Tol eric at atlantech.net
Thu Sep 27 11:11:43 EDT 2007


Thanks for the response.  I've tried this and I get the following error:
 
admin at m20-re0# commit check 
re0: 
error: The routing instance(m20a) is not configured
error: configuration check-out failed
 
Seems like the 'routing-instance' only allows routing-instances and not logical-routers.  :-(

-evt



 


________________________________

	From: BRIANT Alain [mailto:alain.briant at c-s.fr] 
	Sent: Thursday, September 27, 2007 10:48 AM
	To: Eric Van Tol
	Cc: juniper-nsp at puck.nether.net
	Subject: Re: [j-nsp] SNMP for logical routers
	
	
	Yes Eric
	
	I have tried this and it's working well
	
	here is a sample config with a routing-instance
	I believe it working also with a logical router the same way:
	You will need the highlighted statements to have it working.
	
	Alain
	
	
	
	interfaces {
	    fe-0/0/0 {
	        unit 0 {    
	            family inet {
	                address 10.20.0.11/24;
	            }
	        }
	    }
	}
	snmp {
	    community public {
	        authorization read-only;
	        routing-instances reseau1;
	    }
	    routing-instance-access;
	}
	routing-instances {
	    reseau1 {
	        instance-type virtual-router;
	        interface fe-0/0/0.0;
	        routing-options {
	            static {
	                route 0.0.0.0/0 next-hop 10.20.0.1;
	            }
	        }
	    }               
	}
	
	
	
	
	Eric Van Tol a écrit :
	

		Hi all,
		According to this link:
		
		http://www.juniper.net/techpubs/software/junos/junos84/rn-sw-84/rn-new-f
		eatures.html
		
		SNMP separation has been added for logical routers.  This link:
		
		http://www.juniper.net/techpubs/software/junos/junos84/feature-guide-84/
		id-11160689.html#id-11160689
		
		states the same thing and directs you to look at the JUNOS Network
		Management Configuration Guide for more information.  However, that
		portion of the documentation does not mention any such feature.  
		
		Has anyone tried to configure this, and if so, have you been able to get
		it to work?  Any other documentation I should be looking at for this
		feature?
		
		thanks,
		evt
		_______________________________________________
		juniper-nsp mailing list juniper-nsp at puck.nether.net
		https://puck.nether.net/mailman/listinfo/juniper-nsp
		
		
		  




More information about the juniper-nsp mailing list