[j-nsp] RE- RT configuration for L2 VPN and L3 VPN

[senad palislamovic]

Forgive me for jumping in, but since L2VPN and L3VPN are different NLRIs, during import process on receiving PE router, there should not be confusion between L3 and L2 VPNs; thus same RT for both L3 and L2 services should work just fine.

HTH,

Senad

----- Original Message ----
From: P.Narayana Swamy <pnswamy2 at yahoo.com>
To: monika.vpls at gmail.com
Cc: juniper-nsp at puck.nether.net
Sent: Thursday, September 27, 2007 6:13:32 PM
Subject: [j-nsp] RE- RT configuration for L2 VPN and L3 VPN


Hi Monika,

Each VRF needs a unique RT( Either L2 or L3 VPN
),since it imports the route based on the RT
community.

Regards,
Swamy

Should the route target be unique if a set of PEs
provide both VPLS and
L3
VPN services?

To be more elaborate,

PE(rs)-1-------------------------------------------------------PE(rs)-2
I have one L2 VPN and L3 VPN configured in PE1 and
PE2. Can I use same
route-target for L2 VPN and L3 VPN?

Regards,
Monika


       
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


      ____________________________________________________________________________________
Check out the hottest 2008 models today at Yahoo! Autos.
http://autos.yahoo.com/new_cars.html