[j-nsp] RE : RE : LDP issue between M10i and ERX

Tue Apr 15 05:06:13 EDT 2008

I have found this in the Juniper documentation. It seems interesting: https://www.juniper.net/techpubs/software/erx/junose90/swconfig-bgp-mpls/html/mpls-config13.html#2124222

Regards,
Samuel

________________________________

De: juniper-nsp-bounces at puck.nether.net de la part de samuel.gay at bt.com
Date: mar. 15/04/2008 10:49
À: junaid.x86 at gmail.com; juniper-nsp at puck.nether.net
Objet : [j-nsp] RE : LDP issue between M10i and ERX

> I enabled LDP on loopback (but only on the M10i side) but the result is the same. Dont you think that running LDP on loopback is required for establishing directed/targeted LDP session?

You have to activate LDP on loopback if you want use Enhanced LDP, what is useful if you configure Martini L2-VPN and LDP as the signaling protocol.

Regards,
Samuel
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp