[j-nsp] Switch mesh / VRRP question

Wed Apr 16 09:41:20 EDT 2008

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
> bounces at puck.nether.net] On Behalf Of Jonathan Brashear
> Sent: Wednesday, April 16, 2008 8:57 AM
> To: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Switch mesh / VRRP question
>
> In my experience, Juniper doesn't allow the same subnet to be
> assigned
> to multiple _physical_ interfaces.
>
> Network Engineer
> > 214-981-1954 (office)
> > 214-642-4075 (cell)
> > jbrashear at hq.speakeasy.net
> http://www.speakeasy.net

This is correct.  The only possible ways I know of that this would work would be to configure logical-routers, if your platform supports it, or configure two separate VRRP subnets, aggregate your switch1 and switch2 interfaces together, and run VRRP on two subnets.

-evt